Protect your investment and boost curb appeal with professional fence staining by Gate Tech Pros. We prep, repair, and stain cedar and pine fences using premium products and pro methods that extend life, resist UV fade, and shield against moisture.
Call/Text: 682-345-7446 • Based in: Trophy Club, TX • Service Area: Dallas–Fort Worth Metroplex
Why Homeowners & HOAs Choose Gate Tech Pros
- Lasting Protection: Oil-based or professional hybrid stains that penetrate, seal, and resist UV.
- Meticulous Prep: Soft-wash cleaning, sanding high-wear spots, and minor repairs before stain.
- Even Coverage: Pro sprayer application with back-brushing for rich, uniform color.
- Plant & Property Care: Tarps, shields, and edge-guarding to control overspray.
- HOA & Color Guidance: We help you pick approved colors and document before/after.
What We Stain & Seal
- Wood Fences: Cedar or treated pine (privacy, board-on-board, horizontal, shadowbox).
- Gates & Arbors: Match your fence tone; hinges and latch areas carefully masked.
- Decks & Pergolas: Optional add-on for a complete backyard refresh.
Stain Options & Colors
- Translucent / Semi-Transparent: Shows the wood grain (Cedar, Natural, Walnut/Black Walnut).
- Semi-Solid: Extra UV protection with subtle grain visibility (Pecan, Chestnut, Charcoal).
- Solid/OPAQUE (by request): Maximum coverage where color uniformity is key.
- Finishes: Most projects use a single penetrating coat; high-exposure fences may benefit from a second pass after back-brushing.
Typical Re-Coat Window: Every 2–4 years depending on sun exposure, sprinklers, and wood species.
Our Process
- Site Walk & Quote: Measure linear footage/height, wood species, sun exposure, and needed repairs.
- Prep & Cleaning: Low-pressure wash, mildew treatment, light sanding where needed.
- Repairs (Optional): Replace broken pickets/caps, reset screws, tighten gates.
- Mask & Protect: Plants, stone, siding, and hardscape shielded; utility checks.
- Stain Application: Pro sprayer + back-brush for penetration and even color.
- Final Walkthrough: Touch-ups, cleanup, and maintenance tips.
Pricing Guidance
Every fence is different. Pricing depends on linear footage, height, condition, repairs, and color. Get an exact quote with a quick on-site visit.
Call/Text 682-345-7446 – or Book a Consultation Online.
Maintenance Tips (Get the Most from Your Stain)
- Keep sprinklers off the fence line to reduce water spotting.
- Trim plants 6–8″ away to improve airflow and drying.
- Rinse dust/pollen lightly in spring and fall.
- Plan a re-coat at 24–36 months for sun-facing sides.
Service Area
We stain fences across Trophy Club, Southlake, Grapevine, Keller, Roanoke, Northlake, Haslet, Fort Worth, Dallas, Plano, Frisco, McKinney, and nearby DFW communities.
Photo Gallery
FAQ
How long before I can use my gate or touch the fence?
Light surface dry typically 2–6 hours, and cure can continue for 24–48 hours. Avoid leaning items on the fence until fully dry.
Will stain harm my plants or masonry?
We mask and shield everything. Any accidental drips on stone are cleaned immediately.
Can you match an HOA-approved color?
Yes. We’ll sample on a small section to confirm before full application.
What if my fence is gray/older?
We clean and prep first. Heavily weathered boards may need sanding or picket replacement for best results.
Do you stain new fences?
Yes—once moisture content is appropriate (often 2–6 weeks after install, weather-dependent).
Protect Your Fence
Make your fence look new again—get a same-week quote.
Call/Text 682-345-7446 or Book a Consultation Online.